Showing posts with label Craftin Desert Divas Linky Party. Show all posts
Showing posts with label Craftin Desert Divas Linky Party. Show all posts
Aug 15, 2016
Watercolor (Craftin Desert Divas Linky Party)
Hello friends! The theme for this Linky Party at Craftin Desert Divas is
"Watercolor"! We would love to see all of your projects that fit this
theme! So go ahead and craft it and link it up on the Craftin Desert Diva's Blog.
Every other Monday will mark the beginning of a new semi-weekly Linky Party over
at the CDD blog. We hope you will share your projects with us! And don't forget
about the prizes! Every Linky Party will have a winner and a Top 3!
The more times you link up...the more chances you have to win!!
Our Sponsors for this Linky Party are:
CDD- One digi stamp of choice
I stamped the two cute monkeys from the "Lovies" set and colored them in with Zig Clean Color Real Brush markers. Then, I adhered both the banner and the critters to a white top-folding notecard. I found a fitting sentiment in the "Simply Said" stamp set. Before white embossing it, I die cut a flag banner from black card stock. Using foam tape, I also adhered it to the top left of the banner.
Hi everyone and welcome back to a new Linky Party! Today I am sharing with you this card that I made for you. I started off using watercolor card stock and applying lots of water so the watercolor can move around freely. I used a couple of Distress Inks. After everything was dry, I die cut the smallest banner die from it that I wanted to use as a base for my critters.
Thank you so much for stopping by. I am looking forward to seeing your creations on the blog.
Aug 1, 2016
Photo Inspiration (Back to School - Linky Party Craftin Desert Divas)
Hello friends! The theme for this Linky Party at Craftin Desert Divas is
"Photo Inspiration"! We would love to see all of your projects that fit this
theme! So go ahead and craft it and link it up on the Craftin Desert Diva's Blog.
Every other Monday will mark the beginning of a new semi-weekly Linky Party over
at the CDD blog. We hope you will share your projects with us! And don't forget
about the prizes! Every Linky Party will have a winner and a Top 3!
The more times you link up...the more chances you have to win!!
Our Sponsors for this Linky Party are:
CDD- One digi stamp of choice
Hi everyone and welcome back to a new Linky Party. This time we have a picture for you that will hopefully help and inspire you to create amazing projects. I wanted to create a cute little shaker card and used a build-in cutting design of an apple of my Brother Scan'N'Cut. In addition to the apple itself, I also created a little frame in the shape of an apple to create the shaker. I placed a piece of acetate behind the frame and used foam tape to create enough space for the little beads that I wanted to include.
To embellish the card, I used the panda holding a pice of paper from the Panda Pals stamp set. I colored him with Zig Clean Color Real Brush markers and added a simple addition problem to it. I then adhered the panda to the shaker pocket.
Jul 18, 2016
Beach (Craftin Desert Divas Linky Party)
Hello friends! The theme for this Linky Party at Craftin Desert Divas is
"Beach"! We would love to see all of your projects that fit this
theme! So go ahead and craft it and link it up on the Craftin Desert Diva's Blog.
Every other Monday will mark the beginning of a new semi-weekly Linky Party over
at the CDD blog. We hope you will share your projects with us! And don't forget
about the prizes! Every Linky Party will have a winner and a Top 3!
The more times you link up...the more chances you have to win!!
Our Sponsors for this Linky Party are:
Hi everyone and welcome back to another Linky Party. It's summer and the sun is shining so what better theme could there be than "Beach"? To create my card I stamped the cute bear image from "Gotta Wear Shades" on mix media paper and colored it with Zig Clean Color Real Brush Markers.
I wanted to create a clean and simple card with a lot of white space so I decided to die cut a scalloped circle frame using the "Stitched in Circle"die set. Using the smaller circle, I also die cut the circle from blue card stock and used my cutting machine to cut out waves. I adhered everything to a square top-folding notecard and placed the bear in the center of the frame.
Using the Flag Banner dies I die cut a smaller flag from black card stock and heat embossed the sentiment "A splashing good time" with white embossing powder and adhered it to the frame. For some embellishment I stamped a few flowers from the "Island Paradise" set and colored them also with Zig markers and adhered them to the flag banner. For a finishing touch, I applied some glossy accents to the sunglasses of the bear.
I hope you enjoyed my card for the "Beach" Linky Party. I am looking forward to seeing your creations on the blog.
Jul 4, 2016
Coffee (Craftin Desert Divas Linky Party)
Hello friends! The theme for this Linky Party at Craftin Desert Divas is "Coffee"! We would love to see all of your projects that fit this theme! So go ahead and craft it and link it up on the Craftin Desert Diva's Blog.
Every other Monday will mark the beginning of a new semi-weekly Linky Party over
at the CDD blog. We hope you will share your projects with us! And don't forget
about the prizes! Every Linky Party will have a winner and a Top 3!
The more times you link up...the more chances you have to win!!
Our Sponsors for this Linky Party are:
CDD- One digi stamp of choice
Thank you so much for stopping by. I am looking forward to seeing your creations on the blog!
Hi everyone and welcome back to a new Linky Party. For this card I used the Kitchen Cuties stamp set and the cute little cup. The original image included a tea bag that I tried not to ink up and stamp the cup without it with waterproof ink. I then colored it with Zig Clean Color Real Brush pens.
I wanted to create a clean and simple card so I went with a lot of white space on the card. For my sentiment I used the "thanks" die from the Greeting Word dies and die cut it from blue card stock. Using the same card stock, I cut a small strip and adhered it to the bottom of the card. For a little more interest, I also gold embossed some card stock, cut it into a smaller strip and adhered it above the blue strip.
To assemble my card, I stamped the rest of the sentiment "for being there" from the Tiny Sentiments with black in directly above the gold embossed strip. Then I adhered the coffee cup and the thanks die cut to the card. Using glue dots, I also adhered three gold sequins to the card and used a corner chomper to round the top corners.
Jun 20, 2016
Red, White & Blue (Craftin Desert Divas Linky Party)
Hello friends! The theme for this Linky Party at Craftin Desert Divas is
"Red, White & Blue"! We would love to see all of your projects that fit this
theme! So go ahead and craft it and link it up on the Craftin Desert Diva's Blog.
Every other Monday will mark the beginning of a new semi-weekly Linky Party over
at the CDD blog. We hope you will share your projects with us! And don't forget
about the prizes! Every Linky Party will have a winner and a Top 3!
The more times you link up...the more chances you have to win!!
Our Sponsors for this Linky Party are:
CDD- One digi stamp of choice
Hi everyone and welcome back to another Linky Party. For this Linky Party I wanted to create a clean and simple card. I started off die cutting a piece of mix media card stock with the largest fancy frame die and embossed it with Candied Apple Distress Ink. Using the medium die from the same set, I die cut a rectangle from white card stock and stamped the cute kissing fishes from the Lovies stamp set with Memento Tuxedo Black ink. To color them in I used Spectrum Noir markers.
For my sentiment I used the "Thanks" from the new Greeting Word Die Set. Before die cutting it, I used a foam applicator and applied blue ink on white card stock. This was the same blue ink I wanted to use to stamp the rest of the sentiment using "for your friendship" from the Tiny Sentiments set. After die cutting the "Thanks", I adhered it to the center of my card with liquid glue. To embellish the panel, I used light blue and white sequins and adhered them to the corners of the card using glue dots.
To finish off the card, I adhered the scalloped rectangle to a top-folding white notecard. To give the front panel a bit of dimension, I used fun foam and adhered it to the larger panel.
I hope you enjoyed my card and get creative with this challenge! Hope to see you creations on the blog!
Jun 6, 2016
Congrats! (Craftin Desert Divas Linky Party)
Hello friends! The theme for this Linky Party at Craftin Desert Divas is "Masculine"! We would love to see all of your projects that fit this theme! So go ahead and craft it and link it up on the Craftin Desert Diva's Blog.
Every other Monday will mark the beginning of a new semi-weekly Linky Party over
at the CDD blog. We hope you will share your projects with us! And don't forget
about the prizes! Every Linky Party will have a winner and a Top 3!
The more times you link up...the more chances you have to win!!
Our Sponsors for this Linky Party are:
CDD- One digi stamp of choice
Hi everyone, I am back with a new card for the start of a new linky party. I do have a brick wall embossing folder and wanted to stamp a sentiment on embossed card stock so it would look like graffiti. And I thought it would be a great opportunity to combine it with this linky party.
I started off stamping the cute little skunk using Archival Jet Black ink on mix media paper and colored him with Zig Clean Color Real Brush markers. I also stamped the little bee with Memento and colored it with Spectrum Noir markers.
For the background I used a white top-folded notecard and a self-made cloud stencil and applied Tumbled Glass Distress Ink over it and made sure to change the angle of the stencil throughout the whole process. Using brown card stock I created the brick for my card using a stencil by Taylored Expressions. To create the grass, I die cut a piece for the grass using the rectangle die from the Fancy Frame die set and cut the grass.
To assemble my card, I cut down the embossed brick panel and adhered it to the right side of my top-folded notecard as well as the grass panel. Using white pigment ink, I stamped the "congrats!" sentiment on top of the brick. Using 3D foam squares, I also adhered the skunk and the bee to the card.
I hope you enjoyed my card and I am looking forward to seeing your creations!!
Here are all the CDD products I used:
(click on the picture to get redirected to the product)
Subscribe to:
Posts (Atom)








